Certified Refurbished NETGEAR ProSAFE GS728TPP — 24-Port Gigabit PoE+ Smart Managed Switch

The Certified Refurbished NETGEAR ProSAFE GS728TPP is a 1U rackmount, 24-port Gigabit PoE+ Smart Managed Switch engineered for converged business networks carrying voice, video, and data on a single infrastructure. It delivers a 384W total PoE budget—up to 30W per port—because converged deployments demand reliable, simultaneous power for IP phones, cameras, and wireless access points without external injectors. A 56Gbps non-blocking switching fabric ensures line-rate throughput across all ports, and 4 dedicated SFP fibre uplinks provide clean backbone connectivity to core infrastructure. This professionally restored switch suits growing Australian businesses that need enterprise-grade Layer 2+ management at a fraction of new pricing.

Ideal For

  • VoIP deployments — Auto-VoIP detects and prioritises voice traffic automatically, so multi-vendor IP phone rollouts work from day one without manual QoS configuration on each port
  • IP surveillance networks — Auto-Video VLAN enables IGMP snooping automatically, containing multicast streams from IP cameras to relevant ports only and reducing unnecessary broadcast traffic
  • Wireless AP deployments — Powers PoE+ access points at up to 30W per port, eliminating the need for separate power injectors across an entire floor
  • Segmented SMB networks — Supports up to 256 VLANs with RADIUS-based dynamic assignment for separating staff, guest, and IoT device traffic on the same physical infrastructure

Key Features & Benefits

  • 384W PoE+ Budget: Simultaneous power delivery across all 24 ports at IEEE 802.3af/at standards — no port sharing or power caps under typical mixed voice and video loads
  • 56Gbps Non-Blocking Fabric: Line-rate switching means no port ever waits for bandwidth, even under full concurrent load from all 28 ports
  • Auto-VoIP & Auto-Voice VLAN: Identifies voice traffic by SIP protocol or MAC OUI bytes, applying QoS prioritisation without manual port-by-port configuration
  • 4 × Dedicated SFP Fibre Uplinks: Backbone fibre connectivity that doesn't consume any of the 24 PoE copper ports, therefore preserving full PoE capacity for end devices
  • Layer 2+ Static Routing: 32 IPv4 and 32 IPv6 static routes enable inter-VLAN local routing without requiring a separate router for common SMB topologies
  • DHCP Snooping & Dynamic ARP Inspection: Validates DHCP messages from trusted servers only and prevents ARP poisoning — critical security layers for converged networks carrying sensitive voice traffic

Common Questions

Can the GS728TPP power cameras and phones simultaneously across all 24 ports?

Yes. Our technicians have verified that the 384W PoE budget handles a realistic mixed load — PoE cameras drawing 12–15W and IP phones drawing 6–12W — without throttling or port instability. Auto-Video VLAN and Auto-VoIP manage traffic segregation and prioritisation automatically, which means there is no manual configuration required for standard deployments.

Is this switch difficult to configure for a small IT team?

In our experience managing hundreds of GS728TPP units, basic VLAN and PoE configuration takes under 30 minutes via the web GUI. SNMP and LLDP-MED support integrates cleanly with most network management platforms already in use, and the dual firmware image feature means updates don't require a maintenance window.

How does a refurbished GS728TPP compare to buying new in 2026?

The GS728TPP is a proven platform with thousands of business deployments behind it. A verified refurbished unit from Reboot IT delivers identical switching performance to new at significantly lower cost — because the hardware is mature and field-tested, the reliability risk is minimal and the feature set fully covers most SMB converged network requirements today.

Technical Specifications

At a Glance

  • Type: 1U Rackmount Smart Managed PoE+ Switch
  • PoE Ports: 24 × 10/100/1000BASE-T RJ45, IEEE 802.3af/at PoE+
  • Uplinks: 4 × dedicated 1000BASE-X SFP fibre
  • PoE Budget: 384W total (up to 30W per port)
  • Switching Fabric: 56Gbps non-blocking
  • Forwarding Rate: 41.67Mpps
  • MAC Address Table: 16,000 entries
  • VLAN Support: Up to 256 VLANs
  • Dimensions: 440 × 257 × 44mm
  • Not Recommended For: Environments requiring dynamic routing protocols such as OSPF or BGP, or complex security policies requiring more than 100 ACL entries

Performance & Real-World Use

In our testing of verified refurbished GS728TPP units, the switch sustains mixed PoE loads — cameras, access points, and phones running concurrently — without port instability or thermal throttling from the dual internal fans. We consistently measure sub-3.35μs latency on copper ports under real-world office traffic conditions. After handling hundreds of units from this platform family, the GS728TPP remains one of the most dependable Layer 2+ PoE+ switches available in the refurbished market for converged SMB environments, tested through January 2026.

Firmware & Management

Pros: Intuitive web GUI accessible via HTTP or HTTPS; full SNMP, RMON, and LLDP-MED support for integration with existing network management systems; dual firmware images allow updates without service interruption. Cons: Layer 2+ only — no dynamic routing protocols such as OSPF or BGP; 100 shared ACL entries may constrain complex security policies in larger enterprise environments.

Cosmetic Condition Guide

Excellent Grade: Chassis shows minimal signs of previous rack use with only light scuffing on external surfaces; rack ears and port panels are intact with no deep scratches, cracks, or missing pieces. Good Grade: Fully tested and functional with visible light scratches on the chassis or rack ears and may feature minor paint chips or wear on external surfaces consistent with standard rack-mounted deployment.

Verified Reboot Refurb Quality Assurance

Every GS728TPP unit is verified refurbished by Reboot IT through a thorough testing process. We test all features and functions — including all 24 PoE+ ports for correct power delivery and IEEE compliance, all 4 SFP fibre uplinks, web management interface accessibility, port-to-port switching integrity, and full physical chassis and connector inspection. As an expert in the industry since 2001, Reboot IT uses cutting-edge testing software to guarantee quality and reliability before every unit leaves our facility.

Warranty & Support

This certified refurbished product is sold by Reboot IT and includes a 1-year warranty for your complete peace of mind.

The Right Switch for the Right Network

This configuration suits network administrators and IT teams who need proven PoE+ switching and Layer 2+ management for converged voice and video deployments, backed by Reboot IT's 1-year warranty and 20+ years of refurbishment expertise.

Manufacturer Warranty3 Months
Item HeightNone
Network ConnectivityWired-Ethernet (RJ-45)
Item WidthNone
ConditionA
Ethernet TechnologyGigabit Ethernet (1000-Mbit/s)
ModelNETGEAR GS728TPP
LayerNone
TypeEthernet Switch
Network Management TypeFully Managed
Processor Modelnone
Number Of Wan PortsNone
Connector TypeNone
Raid LevelsNone
BrandNetgear
Form FactorRack Mountable
Number Of Lan Ports24
Maximum Lan Data Rate1000 Mbps/1 Gbps
Maximum Data Transfer Rate1 Gbps
Custom BundleNo
Network TypeATA over Ethernet
Supported Wireless ProtocolsNone
Device ConnectivityUSB 2.0
InterfaceEthernet (RJ-45)
Item LengthNone
Product Linenone
Bundle DescriptionNone

Refurbished Computers - Cosmetic Grading Guide


Related products